Projects2024

Monocoque transport table

  • Workshop fabrication

I designed and manufactured a monocoque transport table for Imperial Racing Green.

Result

A wheeled table that carries the team's monocoque and keeps tools and parts within reach underneath

The team's workshop, with the car's green bodywork resting on a wheeled aluminium table, and a plywood cabinet standing on the floor beside it.The monocoque on the table, in the workshop
An OSB box on the workshop floor holding two plywood trays, before it was fitted under the table.The wooden storage unit during fabrication
The table carrying the monocoque, and its wooden storage unit while it was being built.

The handling problem

The car’s monocoque is the structure everything else bolts to, and the team works on it for weeks at a time. It needs somewhere stable to sit at a comfortable working height, it has to move around a shared workshop, and the tools and parts for the job need to stay close to it.

Fabrication

The table rolls on castors. A frame of aluminium extrusion carries a ribbed mat on the deck and on a lower shelf, so the monocoque rests on a surface that won’t scratch it. Underneath sits a cabinet I built from OSB and plywood: a drawer, a front panel that lifts off to reach the shelves behind it, and a plywood board on side runners that slides out from under the deck.

In use

The plywood board sliding out from under the deck on its side runners, beside the parts laid out on the table. 5 seconds, no sound.